The brake system is one of the most important components of the car, as it guarantees the safety of the driver and passengers by controlling the vehicle speed and stopping it when needed, and with the development of car technology, the brake systems have become more complex and efficient, but it is still vulnerable to faults that may pose a great danger while driving.
Knowing the causes of these faults and their symptoms helps in dealing with them before they worsen, which enhances safety on the road, and one of these symptoms is:
Difficulty pressing the brake pedal
If the brake pedal is severe or difficult when pressing, this may be an indication of a problem with the hydraulic system of the brake, the cause is usually a lack of brake liquid or leakage of hydraulic pipes, which leads to a weakness of the brake response, in some cases, the defect in the main brake pump or blockage in liquid lines may be a precise examination to determine the problem and fix it.
Sounds of a raying or friction when pressing the brakes
One of the most common problems in the brake system is to hear abnormal sounds such as the flower or friction during braking, the reason is often due to the erosion of the brake tel, which leads to the friction of the metal together, or because of the accumulation of dirt and moisture on the surface of the tablets and blankets, and sometimes, the use of inappropriate materials in the manufacture of the brake tel may be a cause of the appearance of these sounds, so the system must be examined and the elimination is scanned The erosion to maintain the performance of effective brakes.
Vibration of the car when pressing the brakes
If you feel a vibration in the steering wheel or in the entire car during braking, this may be due to the damage or deformation of the brake tablets, this leads to an unequal distribution of the braking strength, which causes a clear fluctuation during stopping, this problem may also result from irregular erosion in the tablets due to frequent use or exposure to high heat, preferably examining and re -feeding or replacing them if necessary to avoid effect The negative to control the car.
Increase stopping distance
When the distance that the car needs to stop after pressing the brakes, the reason may be the erosion of the brake tel or the low efficiency of the brake tablets, this leads to reducing the friction force required to stop the car, which exposes the driver to the risk of loss of control in the emergency situations, in some cases, the low pressure of the brake liquid or its leakage may cause the weak response, which requires an immediate examination and the necessary maintenance to ensure to ensure The maximum safety.
Jacket
The leakage of the brake liquid is one of the most dangerous problems that the system may face, as it leads to loss of pressure inside the tubes, which reduces the effectiveness of the brakes significantly.
The car deviation at the brake
If you notice that the car deviates to one side when pressing the brakes, the reason may be an imbalance in the hydraulic system or damage to one of the presses inside the cables, there may also be a problem with air pressure inside the tires or uneven erosion in the brakes, which leads to the variation of the force of braking between the wheels, and in this case, the system must be fully examined to ensure a balanced distribution of the braking force on all wheels.
How to diagnose brake crashes
It is necessary to examine the level of the brake liquid regularly, as any abnormal decrease may be evidence of a leakage, and the condition of the brake and brake tablets must be verified. It is also advised to monitor the performance of the car at the brake, and if you notice any unnatural change, it is better to go to a specialized maintenance center to ensure the safety of the system.