Fortman, D. J. et al. Approaches to sustainable and continually recyclable cross-linked polymers. ACS Sustain. Chem. Eng. 6, 11145–11159 (2018).
Google Scholar
Post, W., Susa, A., Blaauw, R., Molenveld, K. & Knoop, R. J. I. A review on the potential and limitations of recyclable thermosets for structural applications. Polym. Rev. 60, 359–388 (2020).
Google Scholar
Liu, Y. et al. Closed-loop chemical recycling of thermosetting polymers and their applications: a review. Green Chem. 24, 5691–5708 (2022).
Google Scholar
Liu, B. & Abu-Omar, M. M. in Advances in Inorganic Chemistry Vol. 77 (eds Ford, P. C. & van Eldik, R.) Ch. 5 (Academic, 2021).
Yang, X., Cui, C., Tong, Z., Sabanayagam, C. R. & Jia, X. Poly(ε-caprolactone)-based copolymers bearing pendant cyclic ketals and reactive acrylates for the fabrication of photocrosslinked elastomers. Acta Biomater. 9, 8232–8244 (2013).
Google Scholar
Cheng, C., Qi, K., Khoshdel, E. & Wooley, K. L. Tandem synthesis of core–shell brush copolymers and their transformation to peripherally cross-linked and hollowed nanostructures. J. Am. Chem. Soc. 128, 6808–6809 (2006).
Google Scholar
Johnson, J. A. et al. Synthesis of degradable model networks via ATRP and click chemistry. J. Am. Chem. Soc. 128, 6564–6565 (2006).
Google Scholar
Chen, X., Wudl, F., Mal, A. K., Shen, H. & Nutt, S. R. New thermally remendable highly cross-linked polymeric materials. Macromolecules 36, 1802–1807 (2003).
Google Scholar
Bettenhausen, C. Cargill to build biobased 1,4-butanediol plant. C&EN 99, 10 (2021).
Feist, J. D. & Xia, Y. Enol ethers are effective monomers for ring-opening metathesis polymerization: synthesis of degradable and depolymerizable poly(2,3-dihydrofuran). J. Am. Chem. Soc. 142, 1186–1189 (2020).
Google Scholar
Spring, S. W. et al. Poly(2,3-dihydrofuran): a strong, biorenewable, and degradable thermoplastic synthesized via room temperature cationic polymerization. J. Am. Chem. Soc. 144, 15727–15734 (2022).
Google Scholar
Crivello, J. V. & Sangermano, M. Visible and long-wavelength photoinitiated cationic polymerization. J. Polym. Sci. A 39, 343–356 (2001).
Google Scholar
Coran, A. Y. in The Science and Technology of Rubber 4th edn (eds Mark, J. E. et al.) Ch. 7 (Academic, 2013).
Elshereksi, N. W., Kundie, F. A., Muchtar, A. & Azhari, C. H. Protocols of improvements for PMMA denture base resin: an overview. J. Met. Mater. Min. 32, 1–11 (2022).
Google Scholar
Shi, C., Clarke, R. W., McGraw, M. L. & Chen, E. Y.-X. Closing the ‘one monomer–two polymers–one monomer’ loop via orthogonal (de)polymerization of a lactone/olefin hybrid. J. Am. Chem. Soc. 144, 2264–2275 (2022).
Google Scholar
Jing, F. & Hillmyer, M. A. A bifunctional monomer derived from lactide for toughening polylactide. J. Am. Chem. Soc. 130, 13826–13827 (2008).
Google Scholar
Li, A., Ma, J. & Wooley, K. L. Two distinct, reactive polymers derived from a single norbornenyl–methacryloyl bifunctional monomer by selective ATRP or ROMP. Macromolecules 42, 5433–5436 (2009).
Google Scholar
Shieh, P. et al. Cleavable comonomers enable degradable, recyclable thermoset plastics. Nature 583, 542–547 (2020).
Google Scholar
Yoshida, Y., Krishnamurthy, S., Asakura, N. & Endo, T. Bivalent monomer bearing styryl and five-membered cyclic dithiocarbonate moieties for orthogonal radical and cationic ring-opening polymerizations. J. Polym. Sci. 61, 1651–1659 (2023).
Google Scholar
Goto, M., Miyagi, Y., Minami, M. & Sanda, F. Synthesis and crosslinking reaction of polyacetylenes substituted with benzoxazine rings: thermally highly stable benzoxazine resins. J. Polym. Sci. A 56, 1884–1893 (2018).
Google Scholar
Yang, R., Han, M., Hao, B. & Zhang, K. Biobased high-performance tri-furan functional bis-benzoxazine resin derived from renewable guaiacol, furfural and furfurylamine. Eur. Polym. J. 131, 109706 (2020).
Google Scholar
Sweet, K. R. & Stanzione, J. F. III Epoxy-functional thermoplastic copolymers and their incorporation into a thermosetting resin. J. Appl. Polym. Sci. 138, 50608 (2021).
Google Scholar
Ebert, T., Wollbrink, A., Seifert, A., John, R. & Spange, S. Multiple polymerization – formation of hybrid materials consisting of two or more polymers from one monomer. Polym. Chem. 7, 6826–6833 (2016).
Google Scholar
Leite, L. et al. Copper-promoted cobalt catalysts for 2,3-dihydrofuran synthesis. Appl. Catal. A 311, 86–93 (2006).
Google Scholar
Barr, D. A. & Rose, J. B. Cationic polymerisation of 2: 3-dihydrofurans. J. Chem. Soc. 0, 3766–3769 (1954).
Ogawa, Y., Sawamoto, M. & Higashimura, T. Living cationic polymerization of cyclic unsaturated ethers. Polym. J. 16, 415–422 (1984).
Google Scholar
Sanda, F. & Matsumoto, M. Degradation behavior of poly(2,3-dihydrofuran). J. Appl. Polym. Sci. 59, 295–299 (1996).
Google Scholar
Hsu, T.-G. et al. Mechanochemically accessing a challenging-to-synthesize depolymerizable polymer. Nat. Commun. 14, 225 (2023).
Google Scholar
Bagheri, A. & Jin, J. Photopolymerization in 3D printing. ACS Appl. Polym. Mater. 1, 593–611 (2019).
Google Scholar
Kim, D. H. & Kim, S. C. Dicumyl peroxide-initiated crosslinking reaction of low density polyethylene. Polym. Korea 8, 44–52 (1984).
Google Scholar
Aregueta-Robles, U. A., Martens, P. J., Poole-Warren, L. A. & Green, R. A. Tailoring 3D hydrogel systems for neuronal encapsulation in living electrodes. J. Polym. Sci. B 56, 273–287 (2018).
Google Scholar
Sangermano, M. et al. Cationic photoinitiated copolymerization of 1-propenyl–vinyl ether systems. Eur. Polym. J. 38, 655–659 (2002).
Google Scholar
Kottisch, V. et al. Controlled cationic polymerization: single-component initiation under ambient conditions. J. Am. Chem. Soc. 141, 10605–10609 (2019).
Google Scholar
Lummiss, J. A. M., McClennan, W. L., McDonald, R. & Fogg, D. E. Donor-induced decomposition of the Grubbs catalysts: an intercepted intermediate. Organometallics 33, 6738–6741 (2014).
Google Scholar
Yagci, Y., Jockusch, S. & Turro, N. J. Photoinitiated polymerization: advances, challenges, and opportunities. Macromolecules 43, 6245–6260 (2010).
Google Scholar
Rylski, A. K. et al. Polymeric multimaterials by photochemical patterning of crystallinity. Science 378, 211–215 (2022).
Google Scholar
Hegedus, T. et al. User experience and sustainability of 3D printing in dentistry. Int. J. Environ. Res. Public Health 19, 1921 (2022).
Google Scholar
Maines, E. M., Porwal, M. K., Ellison, C. J. & Reineke, T. M. Sustainable advances in SLA/DLP 3D printing materials and processes. Green Chem. 23, 6863–6897 (2021).
Google Scholar
Mikawa, Y. Characteristic absorption bands of vinyl ethers. Bull. Chem. Soc. Jpn 29, 110–115 (1956).
Google Scholar
Maruyama, K., Kanazawa, A. & Aoshima, S. Alternating cationic copolymerization of vinyl ethers and aryl-substituted cyclic acetals: structural investigation of effects of cyclic acetals on copolymerizability. Macromolecules 55, 4034–4045 (2022).
Google Scholar
Hsu, J. H. et al. Direct insertion polymerization of ionic monomers: rapid production of anion exchange membranes. Angew. Chem. Int. Ed. 62, e202304778 (2023).
Google Scholar
Cordero, F. M., Pisaneschi, F., Gensini, M., Goti, A. & Brandi, A. Stereodivergent approach to enantiopure hydroxyindolizidines through 1,3-dipolar cycloaddition of 3-hydroxypyrroline N-oxide derivatives. Eur. J. Org. Chem. 2002, 1941–1951 (2002).
Google Scholar
